InterOp:Connect/Format and Version Support

From DocR21

Parasolid Libraries

The Parasolid, SolidWorks, and Unigraphics components all require a Parasolid communicator license. The following table details the supported versions of the Parasolid libraries. This is the version of Parasolid used by Spatial to compile, link, and test InterOp. No other versions of Parasolid are supported by Spatial.

InterOp Version	Supported Parasolid Version
R20 SP2 onwards	Parasolid 22.0.149
R20 – R20 SP1	Parasolid 21.0.226
R19 – R19 SP3	Parasolid 20.0.118
R18 SP1 – SP3	Parasolid 19.0.172

Reader

Note: Source and Destination cannot be the same format.

The following document formats and their versions are supported for importing into InterOp.

File Format	File Extensions	Versions Supported
CATIA V4	.model, .exp, .session	CATIA 4.1.9 – CATIA 4.2.4
CATIA V5	.CATPart, .CATProduct, .CGR	R2 – R20
IGES	.igs, .iges	Up to 5.3
Inventor	.ipt	6 – 2011
	.iam	11 – 2011
ACIS	.sat, .sab, .asat, .asab	ACIS 1.0 - ACIS R21
Parasolid	.x_t, .xmt_txt, .x_b, .xmt_bin	10 – 22
Pro/E	.prt, .prt.*, .asm, .asm.*	16 – Wildfire 5
SolidWorks	.sldprt, .sldasm	98 – 2010
STEP	.stp, .step	AP203, AP214 (Geometry Only)
Unigraphics	.prt	11 to 18, NX to NX7
VDA-FS	.vda	1.0 & 2.0

Writer

Note: Source and Destination cannot be the same format.

The following document formats and their versions are supporting for exporting out of InterOp.

File Format	File Extensions	Versions Supported
CATIA V4	.model	CATIA 4.1.9 – CATIA 4.2.4
CATIA V5	.CATPart, .CATProduct	R6 – R20
IGES	.igs, .iges	5.3
ACIS	.sat, .sab, .asat, .asab	R18 – R21
Parasolid	.x_t, .x_b	12 – 22
STEP	.stp, .step	AP203, AP214 (Geometry Only)
VDA-FS	.vda	2.0