ACIS Error Messages/Index/A
From DocR22
| ERROR ID | Message | Location |
|---|---|---|
| ABL_ATTRIB_BAD_PROC | Illegal procedure attempted for blend attribute | abl.err |
| ABL_BAD_EE_START_PT | Bad starting point given for edge-edge blend geometry | abl.err |
| ABL_BAD_EF_START_PT | Bad starting point given for edge-face blend geometry | abl.err |
| ABL_BAD_FF_START_PT | Bad starting point given for face-face blend geometry | abl.err |
| ABL_BAD_RAD_FCN | Unable to create valid radius function from given data | abl.err |
| ABL_BAD_VE_START_PT | Bad starting point given for vertex-edge blend geometry | abl.err |
| ABL_BAD_VF_START_PT | Bad starting point given for vertex-face blend geometry | abl.err |
| ABL_CAP_COMPLEX | Situation detected too complex for capping | abl.err |
| ABL_CAP_COMPLEX_PROP_EDGE | Situation detected too complex for capping - capping failed because of presence of prop edge | abl.err |
| ABL_CAP_CONVEXITY_AT_ENDS_INCOMPATIBLE | Situation detected too complex for capping - capping convexities differ at ends | abl.err |
| ABL_CAP_ENDS_NO_BLEND_ATT | Situation detected too complex for capping - open coedge's vertices have no blend attributes | abl.err |
| ABL_CAP_END_POINTS_BAD | Situation detected too complex for capping - capping end points not understood | abl.err |
| ABL_CAP_NO_REF_TO_IMPL_BLEND | Situation detected too complex for capping - none of the faces of tool keep coedges created by capping point to implicit blend attribute | abl.err |
| ABL_CHG_PT_COMPLEX | Geometric configuration around change point too complex | abl.err |
| ABL_CHG_PT_COMPLEX_EDGE | Geometric configuration around change point on edge too complex | abl.err |
| ABL_CHG_PT_COMPLEX_FACE | Geometric configuration around change point on face too complex | abl.err |
| ABL_CHG_PT_COMPLEX_VERT | Geometric configuration around change point on vertex too complex | abl.err |
| ABL_CVX_CALC_FAILED | Automatic blend convexity calculation failed. | abl.err |
| ABL_ENDCAP_COMPLEX | Situation detected too complex for endcapping | abl.err |
| ABL_ENDCAP_FAIL | Attempted endcap has failed | abl.err |
| ABL_ENT_WITH_NO_VERTS | Entity with no verts found. Manually specify help point. | abl.err |
| ABL_EXT_FAIL | Blend surface could not be extended enough for capping | abl.err |
| ABL_FIRST_ERR_MSG | Internal error in blending | abl.err |
| ABL_GEOM_EDGE_STAT | Non-toroidal blend geometry not moving along edge | abl.err |
| ABL_GEOM_NOT_IMPL | Blend geometry for entities not implemented | abl.err |
| ABL_GEOM_NOT_IMPL_VE | Vertex-edge blend geometry not implemented | abl.err |
| ABL_GEOM_NOT_IMPL_VF | Vertex-face blend geometry not implemented | abl.err |
| ABL_GEOM_NOT_IMPL_VV | Vertex-vertex blend geometry not implemented | abl.err |
| ABL_GEOM_SELF_MITRE | Self mitring blend not handled | abl.err |
| ABL_HLP_PT_CALC_FAILED | Automatic help point calculation failed. | abl.err |
| ABL_INCONS_SEGMS | Segment structure inconsistent | abl.err |
| ABL_INSUFF_GEOM | Sufficient legal geometry could not be made for these entities | abl.err |
| ABL_INTERNAL_ERR | Advanced blending internal error | abl.err |
| ABL_LAST_ERR_MSG | Internal error in blending | abl.err |
| ABL_NO_GEOM | Blend geometry ill-defined or undefined | abl.err |
| ABL_NO_GEOM_EE | Edge-edge blend geometry ill-defined or undefined | abl.err |
| ABL_NO_GEOM_EF | Edge-face blend geometry ill-defined or undefined | abl.err |
| ABL_NO_GEOM_FF | Face-face blend geometry ill-defined or undefined | abl.err |
| ABL_NO_GEOM_VE | Vertex-edge blend geometry ill-defined or undefined | abl.err |
| ABL_NO_GEOM_VF | Vertex-face blend geometry ill-defined or undefined | abl.err |
| ABL_NO_SEGMS | No blend faces found to exist between entities | abl.err |
| ABL_OFF_SUPPORT | Blend does not touch a blended entity | abl.err |
| ABL_RADIUS_BIG | Blend radius too big | abl.err |
| ABL_RADIUS_SMALL | Blend radius too small | abl.err |
| ABL_SIDECAP_COMPLEX | Situation detected too complex for sidecapping | abl.err |
| ABL_SIDECAP_FAIL | Attempted sidecap has failed | abl.err |
| ABL_TRANS_COMPLEX | Transition onto next entity too complex to determine | abl.err |
| ABL_TRANS_COMPLEX_EDGE | Transition from edge onto next entity too complex to determine | abl.err |
| ABL_TRANS_COMPLEX_FACE | Transition from face onto next entity too complex to determine | abl.err |
| ABL_TRANS_COMPLEX_VERT | Transition from vertex onto next entity too complex to determine | abl.err |
| ABL_UNSUPP_EDGE | Rubber edge used as support edge is not implemented. | abl.err |
| ABORT_CHECKING | found first insane entity | sanity.err |
| ACIS_CONTROL_C_EXIT | Control-C interrupt | errorbase.err |
| ACIS_ERROR | outcome checks bad | insanity.err |
| ACIS_EXCEPTION_ACCESS_VIOLATION | Access violation | errorbase.err |
| ACIS_EXCEPTION_ARRAY_BOUNDS_EXCEEDED | Array bounds exceeded | errorbase.err |
| ACIS_EXCEPTION_BREAKPOINT | Breakpoint | errorbase.err |
| ACIS_EXCEPTION_DATATYPE_MISALIGNMENT | Data type misalignment | errorbase.err |
| ACIS_EXCEPTION_FLT_DENORMAL_OPERAND | Float denormal | errorbase.err |
| ACIS_EXCEPTION_FLT_DIVIDE_BY_ZERO | Float divide by zero | errorbase.err |
| ACIS_EXCEPTION_FLT_INEXACT_RESULT | Float inexact result | errorbase.err |
| ACIS_EXCEPTION_FLT_INVALID_OPERATION | Invalid float operation | errorbase.err |
| ACIS_EXCEPTION_FLT_OVERFLOW | Floating point overflow | errorbase.err |
| ACIS_EXCEPTION_FLT_STACK_CHECK | Stack check | errorbase.err |
| ACIS_EXCEPTION_FLT_UNDERFLOW | Floating point underflow | errorbase.err |
| ACIS_EXCEPTION_INT_DIVIDE_BY_ZERO | Integer divide by zero | errorbase.err |
| ACIS_EXCEPTION_INT_OVERFLOW | Integer overflow | errorbase.err |
| ACIS_EXCEPTION_IN_PAGE_ERROR | Page error | errorbase.err |
| ACIS_EXCEPTION_PRIV_INSTRUCTION | Privileged instruction attempted | errorbase.err |
| ACIS_EXCEPTION_SINGLE_STEP | Single step | errorbase.err |
| ACOVR_INTERNAL | An internal error occurred in advanced covering | acovr.err |
| ACOVR_PROJECTION_FAILURE | Internal projection failure in advanced covering | acovr.err |
| ADDITIONAL_INFORMATION_AT | An approximation warning was detected. Additional information available via SPA_approx_options.get_error_info_list() | api.err |
| ADDTANG_PROBLEM | system inconsistency processing surface tangency | boolean.err |
| ADD_NO_USECOUNT | called add() on entity with no use count | data.err |
| ADD_TO_CLOSED_BB | adding bulletin to closed bulletin board | bulletin.err |
| AGERR_ALLOC | AGLib unable to allocate memory | aguser.err |
| AGERR_DATA | AGLib data value error | aguser.err |
| AGERR_DEALLOC | AGLib unable to deallocate memory | aguser.err |
| AGERR_FOPEN | AGLib unable to open file | aguser.err |
| AGERR_INIT | AGLib inappropriately initialized | aguser.err |
| AGERR_ITER | AGLib iteration fails to converge | aguser.err |
| AGERR_MISSING | AGLib missing algorithm for this case | aguser.err |
| AGERR_OVERFLOW | AGLib data array overflow | aguser.err |
| AGERR_RANGE | AGlib data out of range | aguser.err |
| AGERR_READ | AGLib error reading from file | aguser.err |
| AGERR_STRUCT | AGLib invalid structure | aguser.err |
| AGERR_TRACE | AGLib trace back | aguser.err |
| AGERR_UNKNOWN | AGLib unknown error | aguser.err |
| ALGORITHM_TRAP | Algorithm trap | rtchecks.err |
| ALK_WEB_ACTIONS_OUT_OF_ORDER | Alk Web Controller did not perform an action that is required at this point | alk_web.err |
| ALK_WEB_BAD_INPUT | Html input is incorrect | alk_web.err |
| ALK_WEB_BAD_RETRIEVAL_ALKI | ALK Web found couldn't retrieve a key for this ALKI | alk_web.err |
| ALK_WEB_BAD_RETRIEVAL_DATA | ALK Web found bad data in retrieved key | alk_web.err |
| ALK_WEB_CANT_CLEAN_SESSION | ALK Web cannot clean up the C++ session files | alk_web.err |
| ALK_WEB_CONTROLLER_ERROR | The ALK Web Controller has a fatal error | alk_web.err |
| ALK_WEB_CPP_SESSION | ALK Web cannot find the C++ session file | alk_web.err |
| ALK_WEB_CREATE_SESSION | ALK Web cannot create the C++ session file | alk_web.err |
| ALK_WEB_MISSING_APP_KEY_MGR_DATA | Alk Web did not get expected data from the app key manager | alk_web.err |
| ALK_WEB_MISSING_INPUT | Missing html input to the ALK web page | alk_web.err |
| ALK_WEB_MISSING_OUTPUT | Missing data to send out to the ALK web page | alk_web.err |
| ALK_WEB_MISSING_PAGE_INPUT | ALK Web page generator is missing expected input data | alk_web.err |
| ALK_WEB_NO_SESSION | Missing Session ID in alk web input | alk_web.err |
| ALK_WEB_PHP_SESSION | ALK Web cannot find the php session file | alk_web.err |
| ALK_WEB_PHP_SESSION_ERROR | ALK Web cannot find expected data in the PHP session file | alk_web.err |
| ALK_WEB_SESSION_ERROR | ALK Web cannot find expected data in the C++ session file | alk_web.err |
| ALK_WEB_UNDEF_STATE | The ALK Web Controller cannot determine the next state | alk_web.err |
| ALREADY_FREE | Attempt to free record already on free list | data.err |
| ALREADY_GOOD_BUT_MODIFIED | Modified an already good entity | healer.err |
| ALREADY_LOST | Attempt to delete record already marked as deleted | data.err |
| ALTERNATE_OPERATION_FOR_ASM_ENTITY | Invalid operation for ASM_ASSEMBLY and ASM_MODEL_REF entities; use corresponding assembly modeling command | asm_error_kern.err |
| AOPT_NOT_SUPP | Acis options not currently supported by this Scheme command | gascm.err |
| API_ASM_WRONG_HISTORY | An assembly modeling API function was called with an incorrect history stream active | asm_error.err |
| API_FAILED | operation unsuccessful | api.err |
| APPROX_ARCLEN_INCORRECT_DISC_INFO | discontinuity info incorrect for arc length reparameterized curve | sg_bs3c.err |
| APPROX_ARCLEN_OPTION_UNAVAILBLE | approximate arclength parameterization not available for coedge approximation | sg_bs3c.err |
| APPROX_DOMAIN_LARGER_THAN_ORIGINAL | the approximation domain is larger than the original curve domain | sg_bs3c.err |
| APPROX_INTERNAL | internal approximation error | sg_bs3c.err |
| APPROX_TEST_FAIL | surface fails approximation test | insanity.err |
| ARCLEN_FIT_FAILURE | failed to fit arc length parameterized approximation | sg_bs3c.err |
| ASAT_READ_OF_SAT_NOT_ALLOWED | Attempted to read SAT when ASAT was expected | asm_error.err |
| ASAT_UNRECOGNIZED_MODE | Encountered unrecognized save mode when reading ASAT | asm_error.err |
| ASM_ADDING_ASSEMBLY_WITHOUT_MODEL | setting assembly pointer on unbound entity manager not allowed | asm_error.err |
| ASM_ADDING_MREF_WITHOUT_ASSEMBLY | Attempted to add model reference to model without assembly | asm_error.err |
| ASM_ALREADY_ASSEMBLY_MODEL | Attempted to create an assembly entity within a model that already has one | asm_error.err |
| ASM_ALREADY_ASSEMBLY_MODEL_LOST | Attempted to create an assembly entity within a model that already has a deleted one | asm_error.err |
| ASM_ALREADY_HAS_MODEL | Attempted to create a model for an entity manager that already has one | asm_error.err |
| ASM_ASSEMBLY_NONLINEAR_MREFS | list of model-refs is non linear (cyclic). Fatal topology error. | insanity.err |
| ASM_ASSEMBLY_OUTSEQ_MREFS | assembly does not point to head of model-ref list. Fatal topology error. | insanity.err |
| ASM_BAD_RECURSION | The entities_changed_vf method must not be used recursively. | asm_error.err |
| ASM_CIRCULAR_MREF | Adding model reference would create circular dependency in assembly tree | asm_error.err |
| ASM_CIRCULAR_MREF_LOST | Adding model reference would create circular dependency with deleted model reference in assembly tree | asm_error.err |
| ASM_COLLECTION_ADD_FROM_INCOMPATIBLE_MODEL | Component entities in a SPACOLLECTION must be in the same model as the collection or a child of the collection's owning model. | asm_error.err |
| ASM_COMPONENT_HANDLE_EMPTY_PATH | Wrong signature of asmi_get_component_handle used for empty path. | asm_error.err |
| ASM_EARLY_VERSION | Cannot save assemblies in save format earlier than R17 | asm_error.err |
| ASM_ENTITY_NOT_OWNED_BY_MODEL | Attempted to obtain handle for entity from model which is not its owner | asm_error.err |
| ASM_INVALID_ADD_MODEL | Attempted to add model which creates circular dependency | asm_error.err |
| ASM_INVALID_ENT_MGR | Invalid entity manager. Corrupt information. | insanity.err |
| ASM_INVALID_MODEL | Attempted to use an invalid model | asm_error.err |
| ASM_INVALID_PROP_OWNER | Invalid model to own property attribute | asm_error.err |
| ASM_INVALID_TYPE | Entity handle not of required type | asm_error.err |
| ASM_MODEL_REF_INVALID_TRANSF | Reflection, scaling and shear transforms not allowed in model-ref - transform model instead | asm_error_kern.err |
| ASM_MREF_INVALID_ASM | model-ref does not have a valid owning assembly. Fatal topology error. | insanity.err |
| ASM_MREF_INVALID_MODEL | model-ref does not have a valid asm_model associated with it. Fatal topology error. | insanity.err |
| ASM_MREF_INVALID_TRANSF | model-ref does not have a valid transform associated with it. Fatal topology error. | insanity.err |
| ASM_MREF_OUTOFORDER | model-refs on list are out of order. Fatal topology error. | insanity.err |
| ASM_MULTIPLE_ASSEMBLY_ERROR | Multiple top-level assemblies not permitted in a single model | asm_error.err |
| ASM_MULTIPLE_ATOMIC_FILES | Attempted to save model to more than one file during atomic save | asm_error.err |
| ASM_NOT_IMPLEMENTED | This assembly functionality not yet implemented | asm_error.err |
| ASM_NOT_REFERENCE | entity handle does not represent a model-reference | asm_error.err |
| ASM_NO_PART | ACIS part entity manager not associated with a part | asm_error.err |
| ASM_NULL_ASSEMBLY | null pointer to assembly given | asm_error.err |
| ASM_NULL_COMPONENT | null pointer to component handle given | asm_error.err |
| ASM_NULL_COMP_ENT | null pointer to component entity handle given | asm_error.err |
| ASM_NULL_EHANDLE | null pointer to entity handle given | asm_error.err |
| ASM_NULL_ENTITY | null pointer to entity handle given | asm_error.err |
| ASM_NULL_MANAGER | null pointer to assembly modeling entity manager given | asm_error.err |
| ASM_NULL_MODEL | null pointer to assembly modeling model given | asm_error.err |
| ASM_NULL_REFERENCE | null pointer to model-reference given | asm_error.err |
| ASM_ONE_MODEL_PER_ATOMIC_SAT | Only one model allowed in a SAT file | asm_error.err |
| ASM_PICK_INTERNAL_ERROR | Assembly pick internal error | hoops.err |
| ASM_PICK_NOT_IMPLEMENTED | Assembly pick not implelmented in this version | gi_scm.err |
| ASM_PICK_NOT_IMPLEMENTED | Assembly pick not implelmented in this version | ng_scm.err |
| ASM_PROPERTY_NOT_ATTRIB | property objects must be of type ATTRIB | asm_error.err |
| ASM_REFERENCE_ALREADY_OWNED | Attempted to add model-reference that was already owned to an assembly | asm_error_kern.err |
| ASM_REF_TO_NULL_MODEL | Error in model reference - model pointer is NULL | asm_error.err |
| ASM_SAVING_ASSEMBLY_TO_SAT | Attempting to save model with assembly to SAT | asm_error.err |
| ASM_SAVING_INCOMPLETE_MODEL | Attempted to save a model for which load failed | asm_error.err |
| ASM_SAVING_ZERO_MODELS | Must save at least one model per file | asm_error.err |
| ASM_UNABLE_TO_RESTORE | Unable to read ASAT header | asm_error.err |
| ASM_UNIX_NOT_IMPLEMENTED | Atomic saves for assembly models currently not implemented for UNIX operating systems | asm_error.err |
| ASSERTION_FAILED | Assertion failed. | rtchecks.err |
| ATOMIC_SAVE_REQUIRES_MODEL_NAME | Default implementation of atomic save requires that all models have names | asm_error.err |
| ATTRIB_BAD_OWNER | Attribute owner is not correct | insanity.err |
| ATTRIB_BEHAVIOR_RANGE_CHECKING_FAILED | Attribute behavior range validation failed | spascmextdev_kern.err |
| ATTRIB_COPY_ACTION_TEST_FAILED | Attribute copy action testing failed | spascmextdev_kern.err |
| ATTRIB_CORRUPT_CHAIN | Attribute chain is corrupt | insanity.err |
| ATTRIB_FROM_TOLERANT_ACTION_TEST_FAILED | Attribute from-tolerant action testing failed | spascmextdev_kern.err |
| ATTRIB_LOP_CHANGE_ACTION_TEST_FAILED | Attribute lop-change action testing failed | spascmextdev_kern.err |
| ATTRIB_MERGE_ACTION_TEST_FAILED | Attribute merge action testing failed | spascmextdev_kern.err |
| ATTRIB_REPLACE_ACTION_TEST_FAILED | Attribute replace action testing failed | spascmextdev_kern.err |
| ATTRIB_REPLACE_GEOMETRY_ACTION_TEST_FAILED | Attribute replace-geometry action testing failed | spascmextdev_kern.err |
| ATTRIB_REVERSE_ACTION_TEST_FAILED | Attribute reverse action testing failed | spascmextdev_kern.err |
| ATTRIB_SPLIT_ACTION_TEST_FAILED | Attribute split action testing failed | spascmextdev_kern.err |
| ATTRIB_TO_TOLERANT_ACTION_TEST_FAILED | Attribute to-tolerant action testing failed | spascmextdev_kern.err |
| ATTRIB_TRANS_ACTION_TEST_FAILED | Attribute trans action testing failed | spascmextdev_kern.err |
| ATTRIB_WARP_ACTION_TEST_FAILED | Attribute warp action testing failed | spascmextdev_kern.err |
| ATT_EXP_REGION_NOTIFICATION_UNHANDLED | Notification to attrib_exploration_region unhandled | blending.err |
| AUTO_CLIP_UNSUPPORTED | Auto Clipping no longer supported | facet.err |
| AXIS_NOT_MADE | Problem encountered computing axis | sweep.err |
| AXIS_N_PLANE | Axis is not on the plane face | sweep.err |
